ATOMSTACK S10 Pro CNC Desktop DIY Laser Engraving Cutting Machine with 410x400mm Engraving Area Fixed-Focus Ultra-thin Laser High-Energy with Eye Protection Quick Assembly Aluminum Alloy Structure for Wood Metal Acrylic Brass Ceramics Leather Engraving ultra-fine focus area is reduced to 0.08*0.06mm, high-density can easily cut 20mm light wood, 15mm thick acrylic;can directly engrave mirror stainless steel metal, ceramics, glass, and engraving & cutting speed is 40% higher than ordinary model, which can be comparable to effect of 150W CO engraving machine. all-aluminum alloy anodized structure design makes machine more durable, and improves accuracy of engraving. entire structure has been designed for quick assembly, and assembly can generally be completed within 10-20 minutes. uses an integrated screw rodwhich makes movement of more precise and coupling more durable.Support offline engraving;In event of an unexpected situation, stop machine at any time to make engraving safer. sintering temperature is to 1200 machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of ultraviolet light, you and people around you can also watch engraving without wear goggles.Reduce cost of your goggles and inconvenience of wearing goggles. no need to adjust focus before engraving; focal area of new is only 1/3 of area of other ordinary lasers, new combine precision engraving and high energy cutting at same time. of fixed-focus is more stable than zoom . There are precise scale lines on X- and Y- to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs. Note: When operating engraving machine, please install protective cover. If it is not installed, you need to wear goggles. Please do not emitter with your hand, or it may burn your hand. Please strong impact on machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to operator or burn . Specification: Output Voltage: DC12V, 3A Input Format: NC, BMP, JPG, PNG, DXF, etc. protective cover: user’s eyes and pets from grabbing . Model: ATOMSTACK S10 Engraving accuracy: 0.01mm Carving Objects:Wood, bamboo, cardboard, , leather, PCB board, aluminum oxide, non-reflective : 50W Length: 445 ± 5nm output : 10-11W Focusing method: fixed focus , no need to focus Package Size: 59.5*35*13cm/ 23*13.8*5.1in Package Weight: 5.77kg/12.7lbs Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Input Voltage: AC100-240V, 50/60Hz Print Size: Recommend Print Size 410*400mm Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin board, sponge; Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Data transmission method: USB connection. Packing List: 1x Adapter 1x Screen Components 1x High-Definition Multimedia Interface Cable 1x Instruction 1x X Assembly 1x Tool Kit 1x Brush 1x Module 1x Film 1x Cutting Pad 1x Y Left Profile 3 x Wood Chips 1x Profile On Base 1x Under Base Profile 10x Wire Tie 1x TFCard 1x Cloth 1x Data Line 1x Card Reader 3x Acrylic Sheet 1x Desiccant 1x Y Right Profile 3x Foot Bracket 4x Foot Pad Foam